max-cable-loss

This command specifies the loss due to cable length on the current T1 interface.

Syntax

max-cable-loss <loss> 

Command	Description
<loss>	Defines the cable loss [dB]: 0.6 dB – Cable length 0-133ft 1.2 dB – Cable length 134-266ft 1.8 dB – Cable length 267-399ft 2.4 dB – Cable length 400-533ft 3 dB – Cable length 534-655ft

Default

By default, the maximum cable loss is 0.6 dB.

Command Mode

Privileged User

Example

This example sets the cable loss to 3 dB on T1 Port 0/1:

(conf-if-t1 0/1)# max-cable-loss 3